Thursday, September 29, 2011

Check Out Fluke 90I-610S 1Amp to 600Amp AC/DC Current Probe for $360.00

Fluke 90I-610S 1Amp to 600Amp AC/DC Current Probe Review


Click To Buy Best Price from Amazon

Product Feature

  • Current Range: 1 to 600 A DC or AC Peak
  • Basic Accuracy (DC to 400 Hz): +/- (2% of reading + 1 A)
  • Output Signal: 100 A range: 10 mV/A | 600 A range: 1 mV/A
  • Frequency Range: 40 Hz to 400 Hz
  • Working Voltage: 600 V AC rms

Product Overview

AC/DC CURRENT PROBE

Read More ...



My Links : rockwell tools blog reviews

Tuesday, September 27, 2011

Great Price Fluke i2500-10 iFlex Flexible Current Probes

Fluke i2500-10 iFlex Flexible Current Probes Review


Click To Buy Best Price from Amazon

Product Feature

  • iFlex flexible current probe expands the measurement range to 2500 A ac
  • CAT IV 600 V, CAT III 1000 V
  • 7.5 mm coil diameter allows measurement in tight spaces
  • Ergonomic design allows easy operation with one hand
  • 1.8 m (6 ft) cable

Product Overview

Unprecedented measurement flexibility The new iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access. Overview Be ready for anything. The new Fluke iFlex flexible current probes expand the measurement range of the select Fluke meters to 2500 A ac while providing the ultimate measurement flexibility. The iFlex probes connect directly to the meter, displaying current measurements without error prone scaling factors. The 1.8 m (6 ft) cord allows separation between the measurement location and the clamp meter making it easier to view the display. The large loop size and thin cross section allow measurement of awkward sized conductors and improved wire access in crowded spaces. Available in 25 cm (10 in) and 45 cm (18 in) sizes. Safety Conformance IEC/EN 61010-1:2001, 1000V CAT III, 600V CAT IV

Read More ...



Related : rockwellrk 9000 jawhorse uk games and toy store to buy

Sunday, September 25, 2011

Forklift Attachments and Concrete Skip Hire - needful equipment

These attachments can be fitted and removed to make the forklift perform widely dissimilar tasks. Concrete skips may not have the versatility of forklift attachments but they are necessities and concrete skip hire is always ready for whoever wants it. A forklift, which also goes by the name lift truck, is valuable tool in the manufacturing and warehousing industry. The established production of these power trucks can be traced practically to the first quarter of the twentieth century and it is a goods that has continuously evolved over the years into multiple incarnations. What gives a forklift its versatility are the forklift attachments that come with widely dissimilar functionalities. These are designed to do dissimilar jobs and have dissimilar load carrying capacities. Forklifts can be qualified to carry whatever from one to five tons of load. Over the years the fascination for forklifts have evolved so much that there are forklift rodeos conducted where forklift operators eagerly compete.

One of the forklift attachments is the rotator, an attachment that can be rotated and comes in handy for transferring products from one holder to another. Another is slab removal clamp for clamping the edge of marble slabs and lifting them from containers. Drum handler is yet Another one, and it is a mechanical expedient that can be slid into the forks of a truck and is used for loading and unloading drums. Rug rams and rug poles are used for transporting rolls and coils easily. Then there is the battery changer attachment designed to remove commercial batteries and replace them in forklift trucks. Passage platforms for raising workers to required heights can also be attached to a forklift. Also these, there is an endless collection of attachments like forklift buckets, forklift yard blade, forklift snowplow etc. In short, forklift attachments will make people's day in every type of loading and unloading, and building work, and in the clearing and cleaning jobs he has to do.

Clamp Meter

Concrete skips hire is the lasting requirement of those in the building manufactures because these skips are valuable for pouring concrete by means of cranes, tower cranes, or ropeways. Small size skips commonly have the capacity of about half a cubic meter and higher capacity concrete skips have a capacity up to 2.5 cubic meters. Small capacity skips which have a full size gap ,break can be unloaded by the crane operator himself without dismounting. Higher capacity skips might have to be manually or pneumatically operated. Concrete skip hire is ready for shorter periods as well as for longer periods at very competing prices and a hunt over the internet can honestly contribute you with a list of clubs that contribute concrete skips for hire.

Forklift Attachments and Concrete Skip Hire - needful equipment

Tags : rockwell tools blog reviews

Friday, September 23, 2011

Welder repair - equipment List

There are thousands of mend Centers throughout North America that assistance and mend Welders. This tool is used by Hobbyists, Farmers, and manufactures professionals for both Hand and Automation applications. The Welders can be ordinarily classified as being Transformer based, Transformer based with Scr switching, Chopper or Inverter based. High end products such as motor Driven Welders, Synergic Mig Welders, and Plasma Welders fall into these same general categories.

Eventually, this tool will fail and want repair. Large organizations take on in-house repairs but the majority of work occurs in secretly run small businesses. Sufficient Welder assistance and mend requires that the mend Centers have a full range of Test tool and Welding Accessories. The following list outlines a good starting point for procurement of this Equipment:

Clamp Meter

1. Customary Ac Power (Mains): 115V, 208/230V singular and 3 Phase, 460V 3 Phase.

These Voltages are used to encompass discrete input power requirements for multiple Welder configurations. Not all Welders run off the same Customary Ac Voltage. A Welder must be tested at the same voltage as it is being used in the field. Any Welder that is capable of 460V operation must be tested at this voltage. Any Bus voltage equilibrium problems will be noticeable only at the higher Ac input voltage.

2. Dvm (Digital Volt Meter) and Analog Meter.

A Dvm provides great precision for all measurements. Ensure that your Dvm has a Diode Test position, and is capable of measuring Capacitance. These are prominent features to have. An Analog Meter is also useful. It can furnish a good indication of Power furnish ripple on a Dc furnish through judgment of Meter needle stability.

3. Battery powered Dso (Digital storehouse Oscilloscope).

Mains powered Oscilloscopes have grounded Alligator clips on the Oscilloscope Probes. I.e. The Bnc outer is electrically associated to Mains ground. This can cause signal shorts when a measurement is being carried out. To avoid this question a Mains Isolation Transformer and/or Isolated Probes will need to be used. Battery powered Dso's do not have this issue. tool portability is also prominent in a Workshop environment.

4. Igbt & Mosfet Tester or Component Analyzer.

Tests the functionality of Igbt and Mosfet switching components when a gating signal is applied. A Component Analyzer provides supplementary analysis of the D.U.T (Device-Under-Test) and alleviates the requirement for the Technician to know the configuration of the component leads.

5. Scr Component Analyzer.

Tests the functionality of Scr's with an applied gating signal. A Component Analyzer provides supplementary analysis of the D.U.T (Device-Under-Test) and alleviates the requirement for the Technician to know the configuration of the component leads.

6. Stator Winding Analyzer.

Tests the Stator Windings on motor Driven Welders. Analyzes the windings to determine issues with continuity, and shorted turns. Can be used on both singular phase and 3 phase output windings.

7. Capacitance Meter.

Invaluable for measuring the capacitance of Excitation Capacitors in motor Driven Welders, and other equipment. Some Dvm's do not consist of a Capacitance range.

8. Esr Meter.

Used to portion the Sufficient Series Resistance of Capacitors. Capacitor failures can occur at the lead bonding point. This question can not be seen with a Capacitance Meter, but can list for internal losses. Provides a dissimilar perspective on Capacitor fault analysis.

9. Ac / Dc Current Clamp Meter, capable of measuring up to 1000 Amps.

Allows spoton measurement of Customary Ac Power (Mains) Input current, Welder output current and Wirefeeder Motor current. Provides confirmation of Welder calibration.

10. Load Bank (Active or Passive).

Dissipates Weld output current at rates determined by adjustable resistance settings. Used to validate output current capabilities and for Burn-in testing. Active Load banks can furnish variable output characteristics in real time.

11. Hi-Pot Tester or Insulation Tester.

Used to test for High Voltage leakage conditions (typically to ground).

12. Soldering Iron.

Weller makes some great offerings. Look for Soldering Stations with Esd safe housings. Having the right tips for the job is important.

13. Air Compressor. Up to 120 psi and 600 Scfh.

For general cleaning- Metal dust, and debris. Also used for Plasma Cutter operation.

14. Cylinder gases (Argon, Ar/Co2 75/25).

For Weld testing of units after Repair/Functional Test.

15. discrete Hand tools.

Screwdrivers, Socket wrenches, Wrenches, Pliers, Hammers, Allen keys etc.

16. Torque Driver.

Most screws and bolts need to be torqued correctly to the Manufacturers specification. This is extremely prominent where thermal conductivity properties are important. Igbt's, Mosfet's and Hockey Puck Scr's must be correctly torqued to their Heatsink assembly.

17. Flow meter for torch testing.

Used to check gas flow rates through the torch. prominent for Plasma Welding and Mig applications.

18. Coolant Conductivity Meter.

Used to test the conductivity of coolant that is used in Plasma Welding Systems. If the coolant becomes conductive this can cause the Plasma Welding Torch to come to be shorted. This causes permanent damage.

19. Wireless or Cell phone.

Allows the Technician to describe to Technical maintain staff (Manufacturers representatives) while troubleshooting the Welder.

20. Wirefeeder.

Used for Weld testing Mig (Cv) Welders.

21. discrete Stingers, Mig torches, Tig torches, Leads.

Most Welding Power Supplies don't come in with accessories, unless requested. These need to be ready in dissimilar configurations for Weld testing the product.

22. Loading Dock with Fork Lift or Hoist.

Used to move heavy tool in and out of the workshop.

23. Computer (Desk Top or Laptop) with Internet access.

Used to passage Manufacturers sites for maintain inquiries, and downloading of assistance Manuals. Also, making ready of Word documents, Database passage etc.

24. Esd arresting materials and equipment.

Suitable lengths and quantities of Static Dissipative Matting, Wrist Straps, Foot Straps, Cords, Bonding Points, etc for setting up an Epa (Esd Protected Area). This designated area will be used for transfer of electronic components and Pca's (Printed Circuit Assemblies).

Welder repair - equipment List

Friends Link : psp2 go Reviews

Tuesday, September 20, 2011

Great Price Amprobe ULD-300 Ultrasonic Leak Detector

Amprobe ULD-300 Ultrasonic Leak Detector Review


Click To Buy Best Price from Amazon

Product Feature

  • Includes an instruction manual
  • Hi-Resolution images
  • Unaffected by contaminants, or windy conditions
  • Identifies failing solenoids, valves and bearings
  • Includes headphones, extension tube, parabola

Product Overview

ULTRASONIC LEAK DETECTOR

Read More ...



Related Products

Visit : Motorcycle Store video games Store

Sunday, September 18, 2011

Shapers: Old School Machines Still Being Used Today

Shapers range from particular head machines with fixed spindles to fully self-operating machines with manifold heads. Most shapers are particular head with a cutter head fixed to a rotating spindle. The spindles are threaded on the end and range in size from 1/2" to 1-1/4" in diameter. Many are fitted with different sizes of spindles, as well as with collets for router bits to be used in them. Shapers vary in size and are typically identified by motor's rated power and by the diameter of the spindle. Industrial versions are 5 horsepower (Hp) or greater.

They are used for shaping solid wood components or the edges of panel components. They can be fitted with a material feeder to feed the stock longitudinally or with a sliding table which clamps the material to be fed straight through the cutter head. This application is generally for shaping the ends of component stock. Some have tilting spindles to allow deeper profiles with less cutter projection. There are also duplicate head shapers, generally with one head rotating in each direction. This is to allow the operator to all the time work that the head that is rotating toward the material when approaching, especially when working the ends of material where escape could be a problem. There are also floating head shapers where the material is fed straight through between 2 floating heads to process 2 sides and size in the same operation. There are also rotary and linear manifold head shapers that achieve more complex shaping and edge sanding of components in only 1 pass.

Clamp Meter

Although they achieve similar functions, shapers tend to be quieter than routers. This is because they are belt-driven and turn slower than a router. The router will have a high-pitched whine while a shaper will have a softer humming sound. Other inequity between shapers and routers is that a shaper is a stationary machine designed for higher volume work while a router is more of a hand tool designed for lighter duty work.

An inviting but risky attribute is that shapers are able to run in reverse to be able to achieve certain cuts. It is very prominent to verify the direction setting on the machine, because if you feed a board into a shaper that is turning the wrong direction, the board could shoot out of the machine like a missile. Scm, Unique, Casadei, and Onsrud are a few of many brands of shapers on the used woodworking machine store today.

Shapers: Old School Machines Still Being Used Today

Related : Automobuy Store Motorcycle Store

Friday, September 16, 2011

2 Helpful Pointers to Remember in Using the different Types of galvanic Grills For Easy Grilling

Open grill and caress grill are the two types of galvanic grill that can be use for grilling any kinds of dishes.

Using the galvanic grills can make your barbeque party easier. With just the use of electricity, it will hasten the grilling process of the food. It is an effective cooking equipment that will not let you starve while waiting for the food while barbeque parties. It distributes even heat that will provide a well cooked dish exquisite for the hungry guests. Below are the helpful pointers to corollary in grilling with the dissimilar types of galvanic grill:

Clamp Meter

Open Grill

Some of the open grill have an on or off switch in it. Others have meters that indicate temperature. If you have this type of galvanic grill you should set it to 400 degrees Fahrenheit ideal for grilling. In setting up an open grill you must first find a flat ground so that the grill won't surely tumble. This is to avoid fire and accidents. Before placing the food to the grill, you must preheat the grill first for sanitation. Oil spray is also ideal if the grill does not have a non-stick surface. Place the meat on the grilling face and provide your full attention on to it. Allow the food to cook halfway and use a tong to flip the food for the other side to get cooked as well. Flip the food at the least possible times to have an even cooking on both sides. Know the food's internal climatic characteristic by placing a digital climatic characteristic on it before removing it from the grill. Also don't forget to clean your grill well. You must first unplug it and let it cool completely. Take off the detachable parts and wash it with hot water and soap. Let the grill parts dry completely.

Contact Grill

You can use a caress grill by setting it up on a clean countertop level. Make sure that every part of the caress grill is clean. Plug it for electricity and close the plates right after. Preheat it just like the open grill for sanitation proposes. When the ready light turns on or turn its color depending on you caress grill, you can then put on the food on the heat plate for grilling. Open the grill and put the food in the town of the lower plate. Then close it and clamp it shut for the dish to get cooked. Leave it for about 20 minutes. Precooked dishes only take lesser time to cook. A digital thermometer is also used to know the internal climatic characteristic of the food. When the dish is already ready, open the caress grill to Take off the food. Unplug it and wait for the plates to cool down. When the plates are cooled down it is advisable to wipe the plates with a wet sponge. Allow it to dry before using it again.

2 Helpful Pointers to Remember in Using the different Types of galvanic Grills For Easy Grilling

Related : video games Store

Wednesday, September 14, 2011

Check Out Fluke 87V/IMSK Industrial Multimeter Service Kit

Fluke 87V/IMSK Industrial Multimeter Service Kit Review


Click To Buy Best Price from Amazon

Product Feature

  • Fluke-87V Multimeter with temperature frequency, capacitance 250 µs peak min-max
  • Unique function for accurate voltage and frequency measurements on adjustable speed motor drives
  • Fluke-i400 AC 400A Current Clamp
  • Companion to your DMM to measure up to 400 A AC
  • 80BK-A thermocouple bead probe

Product Overview

Fluke has combined the best selling feature packed 87V Multimeter with the i400 AC Current Clamp. Together they provide the ability to troubleshoot most industrial problems, providing you with the functionality you need to effectively do your job. Additionally, the 87V/IMSK kit represents a significant savings over buying the items separately.Fluke-87V/IMSK Industrial Multimeter Service Kit includes: Fluke-87V Multimeter with temperature frequency, capacitance 250 µs peak min-max6000 counts, 3-3/4 digitsUnique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipmentFluke-i400 AC 400A Current ClampCompanion to your DMM to measure up to 400 A AC1mA/Amp output guarantees easy reading on you meterOnly current clamp available with a CAT IV 600 V / CAT III 1000 V safety ratingSpecially designed to offer maximum utility in a very compact shape22 of the most useful accessories for making measurements in low energy, electronic applications80BK-A thermocouple bead probeTL75 test leadsAC72 Alligator ClipsLimited Lifetime warranty on Fluke-87V and 1-year warranty on accessories

Read More ...



Related Products

See Also : uk games and toy store to buy psp2 go Reviews

Monday, September 12, 2011

Welding Table - Should You Build One Or Buy One?

One of the very first welding projects you should tackle is a welding table. But wait a minute. Are you sure you want to spend the time and money to build a welding table when you might be able to buy one that is portable, foldable, and inexpensive? I am all for manufacture things myself when I can save a dollar. But its depressing when you spend a weekend fighting with a welding task only to realize you could have just bought the thing and spent your time on a better project.

Lets look a some possibilities so that might help in manufacture a good decision on welding tables, from cheapest and easiest, to more expensive and multi functional.

Clamp Meter

3 options for a light duty table:

A 30" x 20" foldable metal table that is designed for welding and that collapses for storage, can be bought ready to use right out of the box. Approximate cost around 0 plus shipping. The cheapest and easiest might surely be a set of home made sawhorses using sawhorse brackets along with a piece of 11 gauge steel for the welding table top. When not in use, the metal can be stored against a wall and the sawhorses can be disassembled and stored out of the way. You could even laminate a piece of 16 ga sheet to a small sheet of 3/4 inch plywood if you wanted. This would serve in a pinch as a light duty table for welding small parts. Approximate cost around $ 80 ( $ 20 for sawhorse brackets for a half sheet of plywood, for two by fours, for sheet metal top.) A stainless steel food table can be bought that can be assembled quickly. (If you weld stainless food assistance type parts, this is a great choice because you don't want stainless steel getting contaminated with iron particles that will later cause rust and staining.) Approximate cost around 0
2 options for a heavy duty table:

Buy a full sheet of 1/2" half inch or ¾" steel plate along with some 3 inch quadrilateral tubing or angle iron and create a super heavy duty welding table that can be hammered on, heated, welded to, clamped to, etc. Approximate cost for the all the steel is around 0 purchase a heavy duty welding table made with 6 individual precision ground steel plates that are Cnc-machined with 5/8in. Holes in a 2in. Grid pattern that will enable you to clamp virtually anyone of any shape. Cost is around 00 plus shipping.

Welding Table - Should You Build One Or Buy One?

Thanks To : uk games and toy store to buy

Friday, September 9, 2011

Great Price Sinometer Professional digital clamp meter, DT266

Sinometer Professional digital clamp meter, DT266 Review


Click To Buy Best Price from Amazon

Product Feature

  • Clamp meter with high accuracy and good reliability
  • Handy display hold keeps measurements on the display
  • Optional insulation tester kit available
  • 90 days money back guarantee and 1 year limited warranty

Product Overview

Specifications: DCV:0-1000 V/0.8%; ACV:0-750V/1.0%; ACA:0-200-1kA/2.0%; R:0-200-20Kohm/1.0%; Insulation Tester Optional,Test:100k-20M/2.0%-2000Mohm/4.0%; Audible continuity:<50+25ohm; Test leads, 9V Battery, a nice carrying bag and user manual are included.

Read More ...



Related Products

Visit : Motorcycle Store video games Store rockwell tools blog reviews

Monday, September 5, 2011

Great Price Fluke I1010-Kit,AC/DC Current Clamp Kit, 600A AC, 1000A DC

Fluke I1010-Kit,AC/DC Current Clamp Kit, 600A AC, 1000A DC Review


Click To Buy Best Price from Amazon

Product Feature

  • Fluke I1010 AC/DC Current Clamp Kit
  • 600AAC
  • 1000ADC

Product Overview

Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. Included with kit: i1010 1-600A AC rms, 1-1000A DC Current Clamp Zippered vinyl carry case with moveable divider Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. Battery-powered Hall-effect probe measures 1 A to 1000 A 1mV/Amp output guarantees easy reading on your meter Take accurate current readings without breaking the circuit Specifications: Measurement type: Hall sensor Nominal current range: 600 A, AC 1000 A, DC Continuous current range: 1 A - 600 A, AC, 1 A - 1000 A, DC Maximum Non-Destructive Current: 1000 A Lowest measurable current: 0.5 A Basic accuracy: 2% + 0.5 A (% reading + floorspec) Useable frequency: DC - 10 kHz Output level(s): 1 mV/A Zero error adjustment Safety Specifications Safety CAT III, 600 V Maximum voltage 600 V Mechanical & General Specifications Warranty: 1 year Battery Life: 9 V, 60 hours Maximum conductor diameter: 30 mm 2 x 25 mm Output cable length: 1.6 m Shrouded banana plugs included

Read More ...



Thanks To : Motorcycle Store

Saturday, September 3, 2011

Great Price Fluke I400S

Fluke I400S Review


Click To Buy Best Price from Amazon

Product Feature

  • Pair a current clamp with your scope or power quality meter to measure up to 400A AC
  • Specially designed to offer maximum utility in a compact shape
  • Take accurate current readings without breaking the circuit
  • Soft non-slippery overmold handle
  • Can be used with DMMs with optional PM9081/001 BNC/Banana adapter

Product Overview

AC CURRENT CLAMP

Read More ...



Related Products

Thanks To : Motorcycle Store

Thursday, September 1, 2011

Why Wood is adored For Elegant Deck Railing

When you refer to elegance in furniture and decoration, you are referring to wood. Wood richness and attractiveness feature every inch of your home and is specially appreciated for creating deck railings ideas.

Why Wood Is beloved For Elegant Deck Railing

Clamp Meter

As most population know, wood show the way the man throughout history,wood help humanity to build their houses: it was shelter, warmth and comfort, and in the memory of people, wood is linked to the elegant and attractiveness unmistakably virtues wood brings to all objects of home style that has been done with it.

Then we stop that Wooden railings are beloved as the most beloved material for railing as the elegance from wood cannot be beaten by anyone else:

Wood railing dated as old as castles in England built in the sixteenth century, they remain seeing beautiful and impressive even today,if you dream metal railings can last for more than five centuries, you know that is something impossible.

Diy Wooden Railing Are Fashionable.

Working on wood and trying to make a remarkable seeing grand style home railings with winding staircases and hard to perform details, is not for Diy fan.

A Diy can work skillfully wood with straight designs.

Straight railings made of wood can be made with wood working tools ready for any Diy fan and it won't take much effort and time.Diy Tools For Wood Railings

What you need to begin with

Tools used for the wooden railings are the same as used to work with any other type of railings. It is understood that you have some skill in wood working already.

The Basic tools can comprise these elements

o A circular saw

o Some Wood worker's Clamps

o A Hand saw

o A hammer and other pieces you can fetch data on your local lumberyard shop or online. Always wear protection goggles, also Hand gloves and Mask.

All these tools must be clean and in good condition, a bad doing from a instrument can deliver an undesirable accident or at least, a bad performed work and one point more to add, before buying wood, you can buy a humidity level meter to check the humidity level of the wood.

What Skill Levels To Build Curved Wooden Railings are Needed

Wooden railings in extra straight railings must be carefully as one of the easiest works that a Diy fan can start with. He/she can start with the fencing without much problem and go on working inwards inside the house,working for a period of time will enable the Diy person for a more complex work, as to intend a curved wooden railings for first time, practice and time ready will help such a person to feel more skillfully to work curved railings produce with efficacy.

Fencing is the Abc for the Diy enthusiastic, just learn what types of wood you need and what are the basic forms that you can work. Don't be anxious, take a step by step training on wood working and later, supervene will make grow enthusiastic, allowing you go further, all things you need is time to get skilled on work wood, think that woodworking will lead you to produce your creativity and dare on more detailed objects, at last you can reach a more than standard level on woodworking and your house will show it.

Why Wood is adored For Elegant Deck Railing

See Also : psp2 go Reviews